1. Maintenance of high -speed mobile phones and low -speed mobile phones

1. Must clean the lubricating oil or quality with high -speed mobile phones every day twice, once noon, once in the afternoon. If it is used for more than 30 minutes in a row, you should choose the appropriate time during the treatment process for cleaning and refueling. If it is high -temperature and high -pressure disinfection, it must be completely cleaned before disinfection.

2. Cheer from the air intake of the back end of the mobile phone, until there is oil fog from the head of the machine to spray it (about 2-3 seconds).

3. All high -speed mobile phones and bending brackets have bearings inside the bend. If you do not often maintain lubrication, it will become the main cause of the early failure of the phone.

4. Do not use oxidative potential water (strong acid water) or disinfectant to clean the phone, which will cause early mobile phone failure.

5. It is recommended to disinfect the phone with high temperature and high pressure method. Clean and lubricate before disinfection.

6. When using the car needle, the mobile phone is used to use cleaning lubricating oil to lubricate and maintenance every week to remove the stolen residues in the chip.

7, mobile phone pressure range, high speed: 1.8-2.2MPa; low speed: 2.5-3.0MPa, do not use overload. Excessive air pressure can easily damage the bearings or break the car needle.

8. Use the air pressure after drying.

9. Check the compressor and filter regularly to perform certain maintenance.

10. Please pay attention to the corresponding speed of the car with different working diameter, otherwise it will accelerate the damage of the bearings.

Precautions:

1. After each use, please make sure that the dust particles inside the mobile phone are cleaned to prevent the particles from damaging the bearing.

2. Before using the newly repaired mobile phone, please open the back cover of the mobile phone. Take out the axis heart and wrap the head of the head with a paper towel. Use cleaning lubricant to clean the dust particles remaining in the air road. Cover the back, then use it to use it.